The Trinity System sets new standards for the detailed sound Pickup of your guitar. This System has an internal preamp, but is also available as an external version or as an extended, external Preamp (Quantum.Other instruments can be equipped with the Trinity System, too. Other instruments can be equipped with the Trinity System, too. Ask us!
Easy Installation: The main structural changes to your guitar is in the exchange of the strap nut against a corresponding jack.
The System consists of the following components:
Pure Classic Pickup [»] show/hide
The Pure Classic System works with four Pickups (transducers) that are stuck under the bridge plate.
This eliminates an adaptation of the saddle, which saves a lot of work and fine tuning.
Besides, this is better for the sound of the guitar, because the strings the ceiling directly, without bringing additional disruption, to vibrate. So the natural, authentic and full sound of the wood is transferred, without the harsh and sterile metallic sound of a conventional Piezo Pickup. What you hear is your guitar: the individual sound of your instrument and your playing style. Each of the transducer is for a pair of strings (EA, DG, BE) to produce a balanced sound and no string is extremely loud or soft. Being close to the bridge keeps the percussive sound of the strings in the sound and get the feedback sensitivity low.
Trinity Microphone [»] show/hide
The Trinity Microphone features an integrated 5" gooseneck (allowing it to be positioned in a number of ways, incuding outside the soundhole) and 20-20,000 Hz frequency range.
Technical Information for the Trinity Microphone:
Frequency range mic: 20 - 20,000 Hz
Sensitivity mic: 8 mV / PA / 1 kHz
Maximum SPL mic: 133dB
Polar Pattern: Soft cardioid
Power Requirement: 1.5 - 9 volt
Trinity Preamp internal [»] show/hide
The Trinity Onboard Preamp allows for perfect balancing of a lavalier type mic and a Pickup/transducer.
Channel 2 is a designated mic channel and supplies 9-volt to a lavalier type microphone (as opposed to the Dual Channel Pro ST Preamp, which features two Pickup channels and does not supply mic power).
Each individual channel features volume, gain, and +/- 20 dB bass, midrange, and treble filters.
The EQ is accessible inside the box with trimpots.
This preamp is an amazing unit for its price!
The Trinity Preamp is built with K&K's "Silent-Filter-Technology" and our full size component philosophy. We use full size capacitors and transistors because we think that they sound better that the miniature components in most of today's guitar preamps.
Aside from its strong bass, midrange and treble filters, it offers internal gain adjustments which set the pre amplification factor from 1 to 10 (for each channel). This way, you can boost the input signal up to the 10 fold amount. It features 2 volume controls knobs.
The tone controls offer an incredible +/- 20 dB.
This is a wider range than some big boards on the market today!
The Trinity Preamp has a Main Mix Out which carries both channels (mixed).
To keep the board as small as possible these controls are trim pots (small potentiometers for adjustment with a precision screw driver which is supplied). Once you installed the two Systems you have chosen for your instrument, you can adjust them with the trim pots to your personal taste and needs. During performance, the two volume knobs allow for fast balancing on the fly.
Frequency range 10 - 30,000 Hz
Input Impedance: 1 Mega Ohm Pickup -500K mic
Output Impedance: 3 K Ohm Average
Current: 3.5 mA
Battery hours: about 60
Dimensions: 110 x 85 x 38 mm / 4+3/8" x 3+3/8 x 1+ 1/2 "
Output Jacks: 1/4" instrument jacks
Bass, mid, treble EQ, gain and volume controls per channel
Option: Gold-plated strap nut
Option: Vintage Jack
The vintage version, with its massive brass bush even more precious and you need not have an extension of your strap button hole mostly because it is so small that it can simply be replaced by the existing strap button. Simply add this option to your basket.
Extensions of the System
... are usually very easy to perform because we offer special expansion kits that are customized to your installation.If you don't want to afford a more sophisticated System yet, you can upgrade at any time, without giving away money.The following extensions can also be found under the "Accessories" tab.With existing Systems, the Pure can be combined to provide even more sound variancy. The following extensions can also be found under the "Accessories" tab. With existing Systems, the Pure can be combined to provide even more sound variancy.
Preamps [»] show/hide
Upgrading to Powermix [»] show/hide
Here you will find reviews and customer reviews directly on the manufacturers website. On request we can also provide a test of the "Akustik Gitarre" in German.
Click here to be a great help / FAQ file open (in English) about the K&K products.
Under the "Download" tab you will find the installation instructions in English.
We gladly provide you with a German installation instructions according to EU standard available.
Listen to sound samples on the manufacturer's website at.
On YouTube you can find more sound samples, and installation instructions .
K&K Pickups are RoHS compliant. Piezoceramic is officially excluded.In the manufacture of ceramics, lead is used as it unfortunately currently there is no functional substitute. The lead is incorporated in the ceramic, and is sealed on both sides by a silver electrode. The ceramics is mounted on a solid brass plate. From above it is provided with a plastic seal, so that the lead is so hermetically sealed completely and makes contact with the skin makes it impossible. Damage to the Pickup, because you could come in contact with lead. We are WEEE conform and wear exclusively for K&K products throughout Europe, the responsibility of WEEE.
No customer comments for the moment.
Only registered users can post a new comment.
Shipping € 0.00
Total € 0.00